National Instruments NI PXI-5422 Manual do Utilizador Página 60
- Página / 63
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
NI PXI-5422 Calibration Procedure 60 ni.com
33. Call niFgen_SetAttributeViBoolean to disable the analog
output (niFgen property node: Basic Operation»Output Enabled)
using the following parameters:
• vi: The session handle returned from
niFgen_InitExtCal
• channelName: "0"
• attributeID: NIFGEN_ATTR_OUTPUT_ENABLED
• value: VI_FALSE
34. Call niFgen_SetAttributeViInt32 to set the calibration ADC
input (niFgen property node: Calibration»Cal ADC Input) using
the following parameters:
• vi: The session handle returned from
niFgen_InitExtCal
• channelName: "" (empty string)
• attributeID:
NIFGEN_ATTR_CAL_ADC_INPUT
• value: NIFGEN_VAL_GROUND
35. Call niFgen_Commit (niFgen Commit VI) to commit the attribute
values to the device using the following parameter:
• vi: The session handle returned from
niFgen_InitExtCal
Closing the External Adjustment Session
When you have completed all the adjustment stages, you must close the
external adjustment session to store the new calibration constants in the
onboard EEPROM.
Call
niFgen_CloseExtCal (niFgen Close Ext Cal VI) using the
following parameters:
• vi: The session handle returned from
niFgen_InitExtCal
• action:
– If the external adjustment procedure completed without any
errors, use
NIFGEN_VAL_EXT_CAL_COMMIT. This function
stores the new calibration constants, updated calibration dates,
updated calibration temperatures in the onboard EEPROM.
– If any errors occurred during the external adjustment
procedure, or if you want to abort the operation, use
NIFGEN_VAL_EXT_CAL_ABORT. This function discards
the new calibration constants and does not change any
of the calibration data stored in the onboard EEPROM.
- NI PXI-5422 1
- Conventions 2
- Introduction 2
- What Is Calibration? 3
- Self-Calibration 3
- External Calibration 3
- Why Should You Calibrate? 3
- Software 4
- Self-Calibration Procedures 6
- FGEN Soft Front Panel 7
- External Calibration Options 8
- Optional Calibration 10
- Test Equipment 12
- Test Conditions 12
- Calibration Procedures in C 13
- • Direct path gain 18
- NIFGEN_ATTR_ARB_OFFSET 21
- "0" 21
- Adjusting the NI PXI-5422 32
- Adjust Main Path Pre-Amp Gain 34
- Adjust Direct Path Gain 34
- Adjusting the Analog Output 35
- C value 36
- Iteration 38
- (niFgen Cal 41
- AC in the order 41
- Adjusting the Calibration ADC 55
- Calibration Utilities 61
- Where to Go for Support 63
Electrolux EWT1266TDW manuales
Manuales del propietario y guías del usuario para Arandelas Electrolux EWT1266TDW.
Ofrecemos 1 manuales en pdf Electrolux EWT1266TDW para descargar gratis por tipos de documentos: Manual de usuario
Comentários a estes Manuais